You know how does a no break work? If you don't know anything about it, don't worry! In this post we will teach you everything you need to know about its important capacity.
Electronic equipment connected to a non-break device.
What is a no break?
A no break is a device that acts as a protector for all electronic equipment in the event of an abrupt power outage.
This is possible because this device reserves electrical energy to provide it to the devices linked to it when necessary, offering a sufficient time of energy ranging from 1 to 5 minutes.
The no break changes the source of energy to its backup batteries, otherwise our equipment would not withstand an abrupt power cut and would be systematically shut down.
Origin of its name
The term «no break» is found in English, but in its translation into Spanish it means “without rest”, this is something curious because this device, without electricity, lasts only a couple of extra minutes, allowing all of them to be turned off correctly. connected electronic devices.
Types of no break
In the market we can get no break online, interactive and offline. Then we will talk about their characteristics and how each of them work:
- The online ones are the ones we have been talking about since the beginning, it provides protection in the ups and downs of energy with an uninterrupted flow due to its high voltage regulator and its two batteries.
The no-break online does not pass direct energy from the public service, it receives it in one of its internal batteries and passes it to the second battery of the device, thus creating a continuous flow even after a power outage. This allows the equipment not to be damaged and can be shut down properly.
- The no break interactive are a model that does not have as much capacity for devices that require protection against high voltage, but they do solve some of the electrical voltage problems.
- The offline ones are an economic model, however, it does not provide us with any protection, this because in the face of a sudden cut-off, it does not have an AVR processor.
The AVR processor is an automatic high and low voltage regulator, in addition to this, these devices pass the utility power directly to our equipment.
An offline no break does not have internal batteries which does not protect equipment from sudden power outages. Therefore, this is a model that only regulates overvoltages and is becoming obsolete compared to the others that provide greater protection.
How does a no break work?
At this point we will make it clear how does a no break work since they tend to confuse it with a UPS (Uninterruptible Power Unit), and although both fulfill the function of protecting our devices, they are not the same. Here are the 5 facts about how a no break works:
- It stores energy that you will have available in the absence of electricity.
- Continuously without your equipment noticing the outage, it switches from the public service to the internal battery power supply, this does it for the minutes necessary for your equipment to shut down properly.
- Average response time is 1 to 5 minutes, however this varies depending on the amount of VA (volt amps) the no break has.
- Its most important function is to protect electronic devices from being impacted by abrupt power outages.
- It also protects appliances from overload when power is turned on again.
How is the maintenance of the no break?
The no-break does not need maintenance, however, you must take into account the following tips to extend its useful life as much as possible:
-We should not overload it by connecting equipment that it cannot support or that are inappropriate, such as printers.
-Place it in a space that is not damp or dirty, in this way you can avoid short circuits.
-If your no break is an online model, you can disconnect it once or twice a month and then turn it on, this will allow you to completely discharge its internal battery and not bypass this function.
Top tips for acquiring a good no-break processor
After you have found out what it is and its important function, it is necessary that you know how to choose very well when buying this device since it must be according to your needs, here are 3 tips to acquire it:
1. Consider the measure of watts with which it will work, there are no breaks of various limits, depending on our need.
The above is very important because you must buy it thinking about the devices that you will connect to it and make sure that you will have the ability to work with such tools.
And if you don't know how to do this, just look in the no-break manual what its VA limit is (volt amps).
2. Try not to work with it after a suspension of the electric utility service, this is a device intended to give the important time not to cause direct damage to your equipment and to turn off your devices properly.
3. Try not to associate equipment with a high flow interest, for example, those with an electric motor such as refrigerators, clothes washers, dryers, among others.
As it has already been clear, the no-break is not a power plant, nor is it suitable for equipment such as those mentioned above, because their energy requests would damage the no-break.
If you are interested in these types of articles in the following link you can reinforce your knowledge about preventive maintenance of a computer and thus you will be able to protect the information that you contain in it.