Activate Wi-Fi in Windows 1stIt is a super easy process that is achieved by completing the steps shown in this article and they will lead you to do it correctly and without difficulty.
Enable Wi-Fi in Windows 10
You are one of the users who need to have a connection to a Wi-Fi network on the Windows 10 computer, but you do not know how to activate and deactivate, do not continue going around, you have reached the ideal article, it will take you by the hand how to do it, with the implementation of easy steps and in addition to suggestions that will go you very well.
How to turn Wi-Fi on and off in Windows 10?
The process to activate a Wi-Fi network on your Windows computer is very simple, you just have to let yourself be guided by the procedure shown below, it will look very practical.
- The wifi icon should be located, it is located on the right side of the PC toolbar, click.
- Immediately you must click on the connection symbol and click on Wifi, so that it can be activated.
- A list with the users is displayed where it shows all the available networks that are close to the area, and that also allow connection, including those that request a password, as long as they supply it.
- Select the wifi option you want to connect to, click on "connect".
- If you want to disconnect from the network, you just have to do the same procedure, but this time you have to press “disconnect”.
We invite you to read this article Block wifi intruders.
What to do when the wifi icon does not appear in Windows 10?
If the Wi-Fi icon is not located in the toolbar of the equipment, it means that it is surely connected to an Ethernet network, or failing that the device that supplies the Wi-Fi network is disconnected.
Here is the procedure when I can't activate Wifi windows 10.
- You must click on the "start" button on the screen.
- Select the icon in the shape of a nut to access the "Windows settings" panel.
- Click on the option "internet network".
- Select the option "wifi" in the menu displayed on the left.
- A screen appears, you must slide down until you get the button "change adapter settings".
- A new folder will open, click on the left-hand side on the Wi-Fi adapter, immediately, the menu is displayed, you must select “activate”.
The computer does not connect to Wi-Fi, common causes
When it appears that the equipment does not connect to any existing wireless network, or does not receive any signal, they are due to many aspects, to know them below we will show the most common causes that make the computer not recognize and have a connection to the network.
It is recommended to restart the router or test if some other device connects to the internet, just as you can restart the computer.
Outdated or disabled drivers
If the equipment has faults, it is likely that the drivers are not in an optimal state, in specific cases they may not even be installed, however, we proceed to solve it as follows:
- Access in "device manager".
- Right-click on the "Windows" button and in the pop-up window the option "device manager" is selected, click on this option, where you can do different things with the network drivers that must be identified and displayed.
- Press the arrow in front of the "network adapters" option, which allows you to format the controller configuration as if it were from the factory. This process is achieved by uninstalling the controller and restarting the computer so that the system recognizes it again.
Windows Firewall is often outdated for various reasons and develops a firewall preventing Internet connections, and in addition to safeguarding the computer, but you can try to disable it from the Windows settings, in the security center.