With partitions you can divide the memory, but if you want to group each one you must carry out the process of delete a partition from the hard drive which will be explained in this article.
Erase a hard drive partition
Delete a partition from the hard drive
When creating partitions in a computer, it separates the memories so that each one can have a specific function, but it is also advisable to have the memory in its entirety to perform various actions on the computer, such as installing a new operating system or the running a program that consumes a lot of computer resources.
Even if the device is an SSD or HDD, you can carry out this procedure of eliminating an established partition, so that the user is the one who manages how the storage is distributed on the computer. In this way, the performance of the computer is changed since the transfer of data from the applications is facilitated.
For this process it is necessary to follow a series of steps to facilitate its execution, in the case of an SSD it has properties that simplify the elimination operation, very different in the case of HDDs, and this is because depending on which is the operating system can partition or pool memory.
You can run a program specialized in this procedure, which is known as EaseUS Partition Master, it consists of software that helps the user to modify the partition available on the computer, offers various tools that manages the hard disk, giving the option to create , delete or vary a partition.
If you want to know about a storage device that you can connect to the computer, then you are invited to read the article of NAS hard drive
Procedure
This way, you can also do another way to delete the hard disk partition so that the storage space is freed up to increase access to the data on the computer, so it can be deleted from the system administration, but it must be remembered that files and data must first be backed up.
This is because when a partition is deleted, everything it has is deleted, which is why with a backup you have the possibility of saving the stored data to incorporate them into the system memory when this process ends. By following the specific steps, this operation is simplified and easily performed.
The first thing to do is open Computer Management by pressing the "Start" button that brings up the Windows operating system at the bottom left of the screen. With this a window is displayed where you have to locate the option of "Disk Management" or in English "Disk Management".
Through this option the partitions established on the computer are shown, since this has how the operating system has been configured and its data distribution. Then you must choose which partition you want to delete or if you want to delete all partitions only leaving a single storage memory.
Right-click with the mouse and select the option "Delete", then a window with two options "Yes" and "No" is displayed to define if the security backup of the data that was in was previously carried out. the partition that was removed.
This shows a "Free space" on the hard disk in which you must right click with the mouse to select the option "Delete Partition". With this, you can start to group the memory of the hard disk, you must add the unallocated space to the partition where you want to unify the memory.
For this, you must click on the option to "extend Volume" on the partition determined by the user, for which a system wizard is displayed in charge of extending the volumes in memory. You do not have to modify the established configuration and you must click on the option "Next" and "Finish".
This must be done in each partition that you have and want to group, so that it allows the memory to be in a single one to increase the performance of the computer, avoiding that a failure can be generated in the operating system due to the little available storage. This is how simple this process of removing a partition from the hard drive is.
If you want to solve the failures that can occur in the storage device, then it is recommended to read the article on Repair bad sectors of hard drive
Partitions on an SSD and HDD
When you are going to delete a partition from the hard disk, you must define the storage device, since it can be an SSD or a HDD. Each one has different forms, so it is advisable to know the specific steps so that they are applied correctly and their execution is facilitated.
SSD
In the case of an SSD storage unit, it does not depend on a partition to expand its performance, this is due to how it is constituted and its NAND Flash which is responsible for the corresponding data transfer in the computer, guaranteeing its optimal operation.
In this way, it is not required that a partition be made on this device, so it will not be necessary to delete it since generally you should not have one. But in the case that only one is applied, it establishes that the MBR / GPT divides its storage sectors, that is, it determines each of the blocks in memory from its beginning and where it ends.
This marks a point in a block where it is going to start saving the specific files, and also defines its end point to establish another storage block again to save the information in a specific place. These settings can be defined by the user to be organized according to their needs or can be set automatically.
In this way, any loss in the performance of an SDD is avoided, which is why they are so recommended since they offer a wide range of benefits that help the transfer of data and information. Likewise, it does not share the data stored in each block so that it can be better organized.
HDD
In the case of the HDD storage unit, it is very different from an SDD, since it has plates which are turning and rotating at high speeds, so it presents a rotational latency. This means that it presents an angular speed in its rotation, so it is different in each plate.
This latency affects the reading of the data from the hard disk, so when you have a higher RPM in the motor, the latency decreases thus also influences the transfer of corresponding information from the system, in the same way it provides an aid to the NCQ to determine the distance. less long for the movement of the bits.
This also affects the search time required by the system, whether for a file or an application; Another dependency is the operating system since the dishes can be obtained automatically only in Linux and Windows. When a partition is made, the beginning and end are set on the drive plate.
With this point marked on a defined plate, a record is established on the HDD to continue with the writing of the data that is transferred, when having several plates an assignment is established in each partition and to eliminate them, a specific software can be applied or through team management.