How to fix the cell phone touch? This is one of the components that are more easily damaged, as it is that part of the screen that is most vulnerable and that is exposed to the environment and the risks it contains. As you may suffer from spilled drinks or fluids, the screen may burst or suffer from damage that requires repair or exchange.
Many times the touch screen continues to be functional, that is, the cell phone screen can continue to be used although it can be highly annoying to be able to visualize and discern the elements and visual impulses that appear on the screen.
Differences between tactile and LSD
In order to repair or disassemble the cell phone touch, it is necessary to make sure of the specific part that is to be changed, since the screen it is made up of different elements and circuits that as a whole make up all the functionality of the cell surface
Touch is often confused with the internal screen or LSD, this is the difference:
- Tactile. This refers to the glass, that is, the part that is exposed to the environment and that, in addition, refers to being the most fragile part of the entire screen. This is the component that needs to be changed in case your touch is damaged.
- Internal screen or LSD. This is the internal processing that allows images to be displayed or projected on the surface. That is, the internal part of the screen.
These two are the Main components that make up the screen.
Ways to repair the touch of your cell phone
These are the ways to repair the touch of your cell phone if it is partially broken and is still functional. But before that, you must assess the state of the crystal, it can also be replaced by some other touch component.
Use moldable glue
If the glass of your screen is fragmented, you can try using a special moldable type glue for cell phones. In this way, you can make sure you keep the fragments of glass located on the surface and that no further damage is suffered.
Follow the steps below to paste your screen:
- Clean Air: You must make sure to remove all the strips or glass fragments, you must also make sure that the screen does not have dirt or imperfections caused by the environment.
- Use masking tape to mark out the glue area. You must specify the area where you will use the glue, for this you can use special adhesive tape, which does not damage the affected glass while the glass is glued.
- Apply the glue. You should place it evenly and a fair amount without overdoing it by placing too much glue.
- Remove the masking tape When the glue dries, wait about 30 minutes to remove it.
Put on a screen protector
This is an option that can be done to solve the break of the touch and works in the same way as the glue. Then keeps the fragments inside that converge on the display glass.