It is very important that you check if unscrupulous people have accessed your internet modem, since it can reduce your browsing speed and even worse enter all your linked devices and obtain personal information. Learn here all the details about how to know who is connected to my Wifi network Izzi, with the best practical guide that exists on the web.
How to know who is connected to my Izzi network?
Once you check how many devices are linked to your Izzi modem you will be able to verify which ones are stealing your signal. And the process to check is very simple and easy to do, and you do not need to download any application to carry it out.
So, take a few moments and check your Izzi wireless router, to do this you must access the list of connected devices, just follow the steps described in the previous section. By obtaining the data you will also get valuable information from the linked teams, namely:
- IP address
- Name
- Mac Address
At this point you will be able to answer your question:How to know who is connected to my Wifi network Izzi?, since you will use each of this information and compare it with the information of your devices connected to your Izzi modem.
Important data of linked equipment
The IP Address is the address that is assigned to each device connected to a local network. Therefore, if you know the IP address of your devices connected to your wireless network by default, you will be able to see those addresses unknown to you on the list. And this or these teams will be a potential stranger or intruder that takes advantage of your signal.
The Name is the personalization as we call our device. With the name we usually get quite a few clues from the teams that are stealing the Wifi Izzi. Therefore, any name that we do not recognize is a possible intruder on your network.
While the Mac address is the only number that each computer has. So if you know the Mac of each of your devices, by default you will know who is connected to your Izzi signal.
In the following video tutorial you will find information related to how to know who is connected to my Izzi network and how to block it so that it does not continue accessing the signal without authorization.
It is important to point out that it is very likely that at first glance you do not recognize any of your connected devices such as television, mobile phone, cameras, Tablet, computer, etc., and that at once you want to remove it from your network.
That is why you must be sure that it is not one of your teams. For this we recommend that you check through the Mac address, since this is the best option to know who is connected to your network.
To check, you just have to compare the MAC address found in the list of connected devices with the MAC addresses of the equipment you own and that you could have connected to your Izzi modem.
Application to See Who is Connected to your Wifi Network
Nowadays, thanks to technological advances, Windows users have the option to see who is connected to their Wifi Izzi network from their computer.
It is a portable program called Wireless Network Watcher that can be downloaded for free so that you can recognize and identify your devices that are on a list of all the computers linked to your network, offered by the application.
It is important to note that most of the applications that let you know who is connected to your Izzi modem are too expensive, such as LanScan, which although it is a fairly decent alternative for Mac users, it is paid for the full functionality.
However, it is very easy to use. To see who is connected to your Wifi Izzi network from LanScan you must first install it and then you will have to press the green option Lan your Scan located in the upper left.
This function will analyze your network listing the connected devices, also showing you important information about them, including the manufacturer and the name of the product in SA or that has it.
If you're on a Mac, you should skip to the "Get a second opinion" section. You can get more information on your router's configuration page.
Another option is that if you have an iPhone, you can give the Fing app a try.
Below is a brief explanation of how to know who is connected to my Wifi network Izzi from the Wireless Network Watcher app and from Fing.
Who Connects to Your Wifi From your PC?
The process to find out who is connected to your Wifi Izzi network through Wireless Network Watcher is very simple and easy to do, for this you only have to start the program, and it will automatically do a complete scan of your wireless network.
To ensure that the scan is being carried out correctly, you should see a message in the lower left corner that says "Scanning...", which will disappear when the scan is complete, and a list automatically appears where all the devices connected to your device are reflected. Wi-Fi network Izzi.
This list may seem a bit cumbersome and difficult to understand, especially if technology is not your forte. Not to worry though, we recommend that you skip the columns detailing IP and MAC addresses for now, and just focus on the “Device Name” and “Network Adapter Company” sections.
To help you reduce the elements that make up this list, you will have to select a device and double click on it so that you can add "User Text", and in this way you will be able to identify each connected device.
In the event that you locate any unlabeled equipment on the list, before deleting it you should check if you do not have any device connected to your network that you have not labeled in your home, for example when checking my connected devices I verified that My Amazon Echo was not in the list. list, so I did Alexa verification on my mobile phone and it matched its Mac address to one of the untagged devices in Wireless Network Watcher.
In this sense, if you have searched your house for other devices connected to your network and have not found anything, it is very likely that one of your close neighbors is hanging on your Wifi Izzi and therefore you will have to eliminate it.
Who connects to your Wi-Fi from your mobile?
To find out who is connected to your Wifi Izzi network, the first thing you should do is analyze your network. And Fing app is your best alternative as this one is very easy and simple to use. You just have to download the App from Google Play or from the App Store.
And once Fing is installed and running, opening it will do everything on its own, super fast and without you having to ask it.
In this sense, the Fing application will scan the network to which your mobile phone is connected, and as a result it will show you in the upper left part of your screen the number of connected devices with details such as: names, IP addresses, manufacturers and their MAC codes.
By clicking on any of the devices on the list you will have access to all the information related to it, you will even get a history where you can see how many times it has connected to your network. In such a way that by frequently using this application you will be able to identify the devices that have barely been connected, therefore it is likely that it is an intruder.
We remind you that in the list, in addition to your connected mobile phones and computers, your router, connected printers or your Chromecast will also be reflected.
So that you don't get too complicated, we recommend that you disconnect and reconnect your devices one by one so that when you see them disappear and appear on the list you will know without a doubt that they are yours.
Therefore, if you find a mobile or PC on the list that did not disappear when you disconnected your discarded devices, you will know that it is not yours, and therefore it is the potential invader.
Know how many computers are connected to Izzi
If you feel that the browsing speed is slow, it is very likely that you have more devices connected to your Izzi modem than you have allowed. Therefore, you need to check how many computers you have linked to your network.
In addition, we suggest you constantly change the password of your Izzi modem so that you prevent third parties from entering your network. It is also recommended that you block any user who hangs on your Wifi without permission, later we will explain how to carry out this process.
Steps to follow
Now, in continuation we present the steps to follow to know how many devices are connected to your Izzi modem:
- Open your favorite browser and place the following URL in the address bar, then press the "Enter" key, that way you enter your Izzi modem.
- Enter the word: admin in the box corresponding to the user or user name. In the password or password box you must write the word password.
- Automatically a new page opens that allows you to configure your modem. There you should locate the tab called "Connected Devices" or a similar name.
- If your router is from Arris you must select the “Wireless Client List” or “Client List” option located in the “Lan Setup” submenu.
- Immediately the system shows you in a kind of table how many devices you have connected to your modem.
In addition to showing you the number of devices connected to your network, it also gives you detailed information about them, such as: host name, local IP address, and MAC address.
It is worth noting that you should not settle for just knowing how many intruders you have connected to your Izzi modem, you will have to complete this with other security measures such as those mentioned above and you will see that your internet connection will improve in no time.
How to Block Users from my Izzi Modem?
If you are sure that third parties are connected to your Wifi Izzi network, you must block or disconnect them immediately, since you do not know if they are unscrupulous people who want to access your personal information.
Steps to follow
You can disconnect the devices from your Izzi modem through any of the following alternatives:
- Establishing a blacklist of blocked devices
- Establishing a white list of allowed devices
In the same way, you can combine both options. We also remind you that you should frequently change the password of your Izzi Wifi modem to prevent your signal from being stolen.
It is important to note that these lists can be created by both IP address and MAC address. There is also the possibility that your router allows you to install them by name.
When creating the white list of allowed devices, the MAC address of the Wi-Fi client that is performing the configuration must be included so that said person can return to the main configuration page if necessary.
On the other hand, it is always recommended that the equipment with which this type of configuration is going to be carried out is connected by means of an Ethernet cable.
Another important detail to note is that the client will always need a security key to connect, even when the MAC Address Control allows it to associate with a certain Wi-Fi network.
In addition, the MAC address of the WiFi client is an essential requirement when configuring the MAC address control, whether you want to create the white list of allowed devices or the black list of blocked devices.
MAC Address Control for White List
If you are an Izzi client and you have the 2,4 GHz and 5 GHz wireless networks, it is recommended that you establish the white list of the devices allowed in each of the networks. In case you only have one of the two networks, the process is the same but it is done only once.
We remind you to include the MAC address of the Izzi Wifi modem where the configuration is being carried out, this is to facilitate access to the network, and also allows you to return to the configuration page if necessary.
To configure the MAC Address Control for the White List you must follow the following instructions:
- In the top menu bar you need to select the 2,4 GHz wireless network or 5 GHz wireless network submenu.
- When opening the tab you must press on the “MAC ADDRESS CONTROL” button.
- The MAC address control page automatically appears, there you must click on the "Add" button.
- Immediately a new window called Add MAC Address pops up before you. There you must locate the MAC Address box so you can enter the MAC address.
- Then you must press the Add MAC Address box so that the system saves the added Mac address.
- The MAC Address Control page automatically reappears, and if you want to add more addresses to your white list, you just have to repeat steps 3, 4 and 5 for each additional address.
- Once you have added all the Mac addresses click on the “MAC Address Filter Type” drop-down menu and then you must select the White List that you just created.
- To finish you must press the “Apply” button located on the MAC Address Control page.
Configure White List of Allowed Devices: Continued
Once you click the Apply button the MAC Address Control page will be refreshed. It is also possible that pressing the button will interrupt your Wi-Fi connection. Therefore, at the end of the backup, it is essential that you reconnect to the Izzi Wi-Fi network.
In this way you will have performed the Type of MAC address filtering for the wireless that you selected, configuring it as a White List of Allowed Devices.
Then, as a consequence the Wifi clients added to the MAC address filter list are only allowed on the 2,4 GHz or 5 GHz Wifi network depending on your choice. For example, if you created the white list in the 2,4 GHz wireless network, those devices that are not on the list will be blocked from connecting to the 2,4 GHz Wi-Fi network.
Remember that it is always recommended to configure the MAC address filter list on both wireless networks.
MAC Address Control for Black List
The process to configure the MAC Address Control for the Blacklist of blocked devices is very similar to the one used to create the whitelist, the difference is that in this case you must select “Blacklist”.
In the same way, it is recommended that you configure the Black List for both the 2.4 GHz Wireless network device and the 5 GHz Wireless device so that you proceed to block the Wi-Fi clients added to the list.
Here are the steps you need to follow to configure MAC Address Control for Black List of Blocked Devices:
- Depending on the type of network you want to configure, you must select the Wireless 2,4 GHz or Wireless 5 GHz link located in the upper menu.
- Then click on the MAC Address Control section in the menu on the left.
- The MAC Address Control page automatically pops up before you, where you should check that the MAC address filter list does not have any Mac Address.
- If the list has MAC addresses, you will have to check that they will be blocked from connecting to the network you are configuring. If these are not going to be blocked, you must select them and press the “Delete” button
- Then you must click on the "Add" button
- Immediately the Add MAC Address pop-up appears, locate the MAC Address field where you must enter the MAC address you want to block.
- Once the address has been entered, click on the “Add MAC Address” box.
- You automatically return to the MAC Address Control page and if you want to add more MAC addresses you will have to repeat steps 4-6.
- To continue with the process you must select the option “Type of MAC address filter” from the drop-down menu and then choose the Black List of Blocked Devices.
- To finish, you must press the "Apply" button so that the MAC Address Control page is updated. On the MAC Address Control page, click the Apply button. The MAC Address Control page will be updated.
It is important to note that there is a possibility that your Izzi Wi-Fi connection will be interrupted by pressing the Apply button, as long as the configuration is done by a Wi-Fi client.
In this case, it is necessary to manually reconnect to the Wi-Fi network once the backup is made.
As a consequence of the configuration of the MAC Address Control for the Black List, all the devices added to it will not be able to connect to the 2,4 GHz Wi-Fi network or to the 5 GHz network, as the case may be, therefore only those devices can connect. Wifi clients that do not appear in the Black list of Blocked Devices.
How does Disconnect Devices from my Wifi Izzi?
Once you verify how, how many and who is connected to your Wifi Izzi network, it is recommended that you disconnect that device to prevent third parties from stealing your signal.
To remove the devices from the Izzi Wifi modem you just have to follow these steps:
- Enter the following email address
- Enter the word in the user or user name box: admin and in password type password.
- Press the start button to access the Izzi Wifi modem control panel.
- Select the tab with the name “Network and Internet” and then press the section “Network and Internet Connections”.
- When opening the Connections window you must select the option “Network and Sharing Center”. From here follow the Wifi router process to disconnect the devices you want.
- In the same network center option you must select the alternative "Change Adapter".
- Locate the network connection that requires the established gateway.
- Once you find the network connection you should double click on it to display the Ethernet cable status, LAN status and Wi-Fi status in relation to the network connection name.
- Following the process to disconnect the devices from the Wifi modem you will have to select the "Details" option, from here in the Column called Property you will find the address of the IP gateway based on the type of network.
- In this step you must open a new web browser to enter the IP address found, then press "Enter" to go to the router page.
- Go to the list of connected devices and choose the “Delete” option and look for the device options again, in this way the connected equipment of the Izzi Wifi modem will be deleted.
In the same way, we recommend you change the password of your Izzi Wifi modem.
Improve the Security of your Network
If you have discovered that third parties are hooked to your Wifi Izzi network, do not start chasing them and harassing them so that they disconnect from your signal, since it can be a very exhausting process for you and bring you serious problems, because you do not know what type of beings they are
In these cases, the best thing you can do is make a change in the security of your Izzi Wifi modem. Therefore, you must enter the web interface of your router again and select the option to change your password.
If you don't have a password, it's about time you create and start using one that is also secure. Because without a security key, your modem is more vulnerable to Hackers, who, in addition to stealing your signal, are experts in accessing your personal information.
Once you change the password of your Izzi Wifi modem, it is essential that you link it to all your connected devices: Smartphone, computers, printers, consoles, Tablet, etc.
In this sense, we recommend that you select WPA2 as the password type, since this type is much more complex to crack than the old WEP.
Below we present a video that explains how to change the access code of any Izzi modem, for your safety we advise you to watch it carefully.
On the other hand, check that your WPS is not activated, since this function helps unscrupulous people to more easily decipher your Wifi password. Therefore, in case your WPS is activated, you must deactivate it immediately.
Another option to improve the security of your network is to enable the guest network on your router, in this way you allow third parties you trust to enter your Wifi Izzi network, but without accessing your equipment or your personal information.
In this way we end the content of this complete guide that we have made available to you, we hope that the reading you have done will help you to know who is connected to my Izzi network.
To learn about other topics related to this branch of technology, we invite you to click on the following links:
How does Configure Modem or Password in Speedy?
How does Configure the Wifi of a Telecentre Modem?
connection and technology Vodafone 5G Wi-Fi
How to Increase the Signal or Power of my Telmex modem?
How does Change Une Wifi Password Easily?
All about each of the Branches of Technology