How to repair a wet cell phone that won't turn on? This leaving drop a cell phone into the water it is more common than we think. In the desire to have a pleasant experience away from home to de-stress, share with family or friends, we go to the river or the beach without having anything planned and so much so that we forget our phone.
When we are less predictable, things turn out better but in this effort we can make some mistakes such as taking a dip with clothes, cell phone and everything. And it happens that the cell phone gets wet.
However, with some notes that you must take into account we can repair a wet cell phone that does not turn on. We give you the step by step to recover it and without it suffering further damage. Don't worry and find a good solution here.
Steps to follow to repair a wet cell phone.
We will show you several methods to save a wet cell phone through simple steps to avoid damaging the cell phone that you have wet.
Method one
- The first thing you should do is remove the phone from the water.
- Then turn off the cell phone as soon as you can.
- Subtract the SIM card phone device
- Immediately find a refrigerator and enter the cell phone in the coldest area of it.
Method two
- Immediately remove the battery so that the cell phone turns off.
- If the phone cannot be turned off in this way. Turn off the mobile device manually by means of the on / off button by keeping the button pressed until it has turned off.
- Remove the SIM tray so that the water that has entered can evaporate.
- Enter the wet cell phone in a bowl with plenty of rice grains.
- Leaves put the phone down for at least 24 hours.
- After this time, put it back Battery.
- Test turn on the cell phone.
- If cell phone turns on, it has been good.
- If cell phone does not turn on do not put it to charge.
Method Three: in the hands of a specialist
If the above methods are useless and does not turn on the cell phone, note this one that is from the hands of a technician.
- Apply heat to remove the base with the component battery.
- You unscrew to fully open the phone.
- Each of the components and see if any have suffered any damage.
- Replace the component damaged, if this is the case.
- If the components are ok. Perform a cleaning and remove everything sulfated inside the phone.
- Use a small soft brush to remove sulfate of the components and parts of the cell phone.
- Be careful when removing the motherboard so you can clean and dry the cell phone.
- An aluminum material will be placed to protect components.
- The motherboard will be immersed in a ultrasonic bathtub for half an hour.
- El ultrasound liquid will clean the motherboard of traces of oxides and sulfate.
- While the rest of the phone with isopropyl alcohol and with the help of a brush.
- We proceed to arm the phone and turn it on.