The case may arise in which your storage device does not work properly, that is why this article will explain how optimize an SSD
Increasing the performance of the SSD drive increases data access
Optimize an SSD
When you want to increase the performance of the computer, you can change the hard disk for an SSD, so that you get an increase in the speed of execution of applications and data. However, the case may arise in which the operation of this device decreases so that it has various drawbacks in data transfer.
In these cases, it is recommended to optimize an SSD as appropriate for each computer, so that the device can be used as if it were new. With this process the execution of the applications is generated without any failure, in turn it recovers the speed of data transfer and corresponding files on the computer.
Optimize an SSD in Windows 7 It is different than proceeding in Windows 10, this is because this updated version of the operating system has a support compatible with the storage on the SSD disk. In this way it has the ability to perceive the storage unit to automatically set all the settings for optimization.
Thus, a higher response speed can be obtained in the execution of the data, so that all the advantages that an SSD offers are taken advantage of. You also have the option of using the bandwidth to its maximum capacity, so that the user has an increase in web browsing.
One caveat that should be noted is that this procedure is a bit delicate so it is recommended to take a series of precautions to ensure the system configuration with the SSD. On the other hand, with Windows 7, a series of functions must be established manually mainly that guarantee the performance of the device.
If you want to know what are the best programs to increase computer performance, then it is recommended to read the article on PC Optimizer
Tricks
When you want to optimize an SSD, it is convenient to know a series of tricks that facilitate this process, so that in turn you have the certainty that the operation of the device will return with the data transfer speed that it presented at the beginning. Achieving recovering the storage status of the device and applying all the advantages that it has.
However, this process can be simplified or facilitated if you know a series of tricks which allow you to optimize an SSD in an efficient and safe way. Due to this, the following are the procedures that must be applied to the device to increase its performance and operation:
Update firmware
One of the tricks used to optimize an SSD is to update its firmware, in a similar or similar way to the update that is carried out in the computer's BIOS drivers, as well as the computer's graphics card. Therefore, the most recent version of the computer program should be downloaded so that it keeps the electronic circuits in control.
In this way, the operation or the behavior configuration of the storage device is established, thus also ensuring that the system will be optimized, thus increasing the execution speed of applications and commands. The performance of basic functions is also increased.
Generally, this procedure depends on the type of SSD disk that is being used, since it requires the updated system available from the manufacturer. This must be found on the official brand page, it must be available for the user to download and achieve this requested update.
If you want to know how you can exchange a computer's storage device for an SSD, then it is recommended to read the article on Change a hard drive
Enable TRIM in the operating system
SSD disks have small cells which are responsible for storing the data and files of the equipment, for this they require specific software known as TRIM. This technology has the function of establishing data communication with the system so that the blocks that are empty have the availability to store the required files.
With this trick, the performance of the SSD disk is increased since it runs the system properly to fill the empty sectors with various data. It even guarantees that the system has its latest version, that is, that it is updated to certify the states of the files and data saved on the SSD.
If you have a Windows 10 operating system, when you install the SSD, it will be detected automatically, since it has support for this type of device. For this reason, it is advisable to certify that the appropriate activation is fulfilled, to guarantee the complete operation of the SSD in the computer, especially in the transfer of data from the applications installed on the system.
For this, a check must be carried out, which manages to optimize an SSD, the first thing to do is open the corresponding box of the command prompt, which consists of a window. You must enter a command that is based on the combination of Windows plus the X key, after that you have to select the option called Administrator or Command Prompt.
In a second step, the corresponding command must be added, which consists of: fsutil behavior set DisableDeleteNotify 0. This is done with the intention of generating a specific response which is NTFS DisableDeleteNotify; With these steps you can verify that the TRIM technology of the storage device is available for execution.
Modification to the AHCI interface
In the case that you have a Windows 10 operating system, the AHCI interface is activated when it detects a new SSD installed in the computer, this process is executed automatically being a point of difference when comparing with previous versions of Windows, since these establish an IDE interface which does not take advantage of the potential of this storage device.
The AHCL interface comes from the acronym in English for Advanced Host Contoller Interface, which consists of increasing the power of the device's capabilities, in other words, the data transfer, the execution of the applications, the performance of its functions are increased. it is higher when compared to the other IDE interface.
Optimizing an SSD is related to this AHCI interface, since by means of the protocols integrated in the system, its application is carried out to take advantage of the potential and advantages of this storage device. Generally, when the operating system is installed on the SSD, this interface change is selected.
This has an explanation, and it is because not always all the BIOSes are available to execute the change, it can even generate various errors in the system, an example is the well-known Blue Screen, which is called death operating system. As a consequence of these failures, an incompatibility with the interface and the drivers is obtained.
For this reason, it is recommended that to perform this trick in modifying the interface to an AHCI, proceed with the update of the SSD disk, you can also do a reinstallation of the operating system, so that you have a start from scratch and you can set or activate the desired interface avoiding the IDE.
Disable Prefetch features
The Prefetch functions are responsible for optimizing hard drives, especially their access speed, in the same way are the Superfetch functions that also have this type of objective to increase the entry or path of the corresponding data of the operating system that the computer has .
Search indexing has the same purpose as the functions explained above, they are known as an enabled trace when hard drives were computer storage drives. Another of its functions was to solve and fix the faults or absences that were presented in the system by this type of device.
But due to advances in technology, SSD disks must be used for higher performance, which do not present any type of these absences, so Superfetch, Prefetch and system search indexing become functions that do not contribute anything to the team but rather increase tasks that must be carried out and that are not necessary.
The search indexing of the operating system is responsible for preparing a list where the location of the data and stored files are indicated, which are under the organization and control of the system. This function was very useful in HDD hard drives but with an SDD it does not have to be used.
Because this SDD storage device does not present data latency, so its access is executed in a fast way, that is, the desired file is entered immediately. This is why it is said that these functions of hard drives only cause a decrease in computer performance.
When optimizing an SSD, we proceed to deactivate these aforementioned functions, so it is required to open the "Equipment" window, then click with the mouse on the SDD storage unit and select it in "Properties". Another window is displayed that presents a series of boxes called "Allow".
In this box you must uncheck the option "Allow" where it is said that the files are indexed, now you must click on the option "Apply". This disables its application and properties in the section that says "General", then proceed with the other Prefetch and Superfetch functions.
First you must enter the "Windows Registry" to change the set keys, you must press the Windows key which opens a box in which you must write "Regedit". In this way, you have the permission to enter the Windows Registry Editor, but this process has not yet been completed, since you must be careful about what is going to be disabled and what is not.
After a specific folder must be reached to modify the values of the keys established in the system and a value of 0 is placed in the box to stop its execution, the folder address is HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory ManagementPrefetchParameters.
Clear write cache
The write cache is considered as virtual memory which in the Windows 10 operating system is enabled by default, this is because they help in increasing the performance of the system with a HDD so that it can operate without failures. high speed.
However, when you have an SDD disk, it is not necessary to have the write cache, since when executing this process it consumes or exhausts the operations of the device, shortening its useful life. These devices have memory cells to perform a large number of writing-related operations.
Due to this, a trick to optimize an SDD is to disable the write cache function, thus achieving an increase in access speed and extending the useful life of the storage device. Therefore, it is recommended to apply this procedure with great caution and taking care not to disable other functions that are necessary.
The first thing to do is enter the "This Equipment" window, then right click with the mouse on the "SDD Unit" section. Then select the tab that says "Properties" which will display a box where you must enter the option "Hardware".
Then a box is displayed with a list of the units found in the system, then the SDD unit must be selected and the "Properties" option must be selected. A new window is displayed with other tabs, in which you enter the “General” option, which has several sections, then click on “Change settings”.
This opens another window which must be addressed in the "Directives" option, it must be unchecked to avoid consuming the useful life of the SDD. Finally, the modifications made are accepted and the computer must be restarted in order to execute the established changes.